Water Treatment Plants
Evita Technologies offer Total water solutions for industries and communities. Integrating process technology, design engineering and project management capability, we take end-to-end responsibility – planning, integrating and managing water on supply, quantity, quality, discharge and environmental fronts. By creating quantifiable benefits for our customers,
Technical Specification :
- Feed Water TDS : <1500ppm
- Fluorides : <1ppm
- Iron : <0.1ppm
- Turbidity : <5
- PH : <7.5 & >6.5
- Treated Water ADS : <100ppm
- Total suspended solids : nill
- Turbidity : nill
- PH : <6.5 & >7.5
The plant has been designed as per the above assumptions.
The plant design is as per the norms of BSI for Packaged Drinking Water Plant requirements.
Water Softner
Technical Specification :
- Raw Water TDS : <250ppm
- Water hardness : <50 ppm
- Treated Water hardness Quality : <10ppm
A physical and chemical process filters the water through an exchange media known as resin or zeolite. Typically, the resin is a synthetic or natural, sand-like material coated with positively charged sodium ions. As the calcium and magnesium dissolves into positively charged ions, an ion exchange environment is created. The water flows through the unit while the resin releases its sodium ions and readily trades them for the calcium and magnesium ions. The water flowing out of the device is now considered soft.
Vessel (softener Resin filling) | Fiber/ Polyethmake Make: Pentair |
---|---|
Dia | 610 mm |
Height | 1800mm |
Volume | 451lts |
Pipe Line | 1.5″ |
Output per Hour | 5m3/Hr Output Per |
Regeneration | 150000 Litres. |
Salt per Regeneration | 64 Kgs |
Media | Resign (220 – Na)(Ion Exchange) |
Media Qty | 3.5kg/ Cm2 |
Max Operating Pressure | 4.5kg/ Cm2 |
Multiport Valve | 40 Nb Top& Bottom |
Make | Initiative/Ukl/Rv/Droplet |
Pressure Gauges | 1no |
Make | Rapid/Wave/Equalent |
Air Release Valve | 1no |
Cooling Tower
Technical specifications for cooling tower :
- 1 Cooling tower type Induced draft FRP Cooling Tower
- 2 Capacity 50 Tr Design & operation parameters
- Hot water temperature (inlet) 32 Cold water temperature (out let) 28
- Wet bulb temperature 28.3 Range 4.7
- Fan Speed 960 rpm Motor rating 2 HP
- Input power Evaporation losses 0.002%
- Drift loss 0.01% Type of Fill Rigid PVC
- Fill Height 600 MM
- Type of Nozzle Gun type 3⁄4"
- Structure UV stabilized FRP
- Distribution system PP FRP
- Distribution Nozzles PP FRp